Blown-in attic insulation, 1,000 sq ft to R-38 cost in Texas
Modeled · v0.1 · method published · independent of contractors
In Texas, a fair price for blown-in attic insulation, 1,000 sq ft to R-38 is $925–$1,950 (installed), with a typical price of $1,390. That's 5% below the national typical of $1,470, reflecting Texas's regional cost index of 0.95.
Texas ranks #32 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| Texas | $925 | $1,390 | $1,950 |
| National | $975 | $1,470 | $2,050 |
| Idaho | $925 | $1,390 | $1,950 |
| North Carolina | $925 | $1,390 | $1,950 |
| North Dakota | $925 | $1,390 | $1,950 |
| Montana | $935 | $1,410 | $1,970 |
Other general contracting jobs in Texas
- Full bathroom remodel: $14,450 typical
- 300 sq ft deck build: $8,930 typical
- Structural engineer evaluation: $525 typical
- Sill plate repair or replacement: $2,280 typical
- Subfloor repair, bath or toilet area: $620 typical
- Secure loose railing or post: $245 typical
- Porch or deck railing replacement: $1,000 typical
- Install stair handrail: $335 typical
- Exterior wood rot repair (trim, fascia): $525 typical
- Interior door adjust or repair: $190 typical
- Fogged window glass unit replacement: $430 typical
- Crawlspace vapor barrier install: $2,850 typical
- Tub or shower caulk and grout repair: $260 typical
- Exterior door weatherstripping: $170 typical
- Small drywall patch and paint: $305 typical
- Garage door opener safety reverse adjustment: $195 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the blown-in attic insulation, 1,000 sq ft to R-38 prices in every state, read the general contracting guide, see every job priced for Texas, or see how these prices are calculated.