Blown-in attic insulation, 1,000 sq ft to R-38 cost in Washington
Modeled · v0.1 · method published · independent of contractors
In Washington, a fair price for blown-in attic insulation, 1,000 sq ft to R-38 is $1,120–$2,360 (installed), with a typical price of $1,680. That's 14% above the national typical of $1,470, reflecting Washington's regional cost index of 1.15.
Washington ranks #9 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| Washington | $1,120 | $1,680 | $2,360 |
| National | $975 | $1,470 | $2,050 |
| Connecticut | $1,130 | $1,700 | $2,380 |
| Rhode Island | $1,090 | $1,640 | $2,300 |
| New Jersey | $1,150 | $1,730 | $2,420 |
| Maryland | $1,060 | $1,600 | $2,240 |
Other general contracting jobs in Washington
- Full bathroom remodel: $17,500 typical
- 300 sq ft deck build: $10,800 typical
- Structural engineer evaluation: $635 typical
- Sill plate repair or replacement: $2,760 typical
- Subfloor repair, bath or toilet area: $745 typical
- Secure loose railing or post: $300 typical
- Porch or deck railing replacement: $1,210 typical
- Install stair handrail: $400 typical
- Exterior wood rot repair (trim, fascia): $635 typical
- Interior door adjust or repair: $230 typical
- Fogged window glass unit replacement: $520 typical
- Crawlspace vapor barrier install: $3,450 typical
- Tub or shower caulk and grout repair: $315 typical
- Exterior door weatherstripping: $205 typical
- Small drywall patch and paint: $370 typical
- Garage door opener safety reverse adjustment: $235 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the blown-in attic insulation, 1,000 sq ft to R-38 prices in every state, read the general contracting guide, see every job priced for Washington, or see how these prices are calculated.