Furnace blower motor replacement cost in New Hampshire
Modeled · v0.1 · method published · independent of contractors
In New Hampshire, a fair price for furnace blower motor replacement is $425–$955 (per repair), with a typical price of $635. That's 8% above the national typical of $590, reflecting New Hampshire's regional cost index of 1.08.
New Hampshire ranks #14 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| New Hampshire | $425 | $635 | $955 |
| National | $390 | $590 | $885 |
| Colorado | $425 | $635 | $955 |
| Maryland | $425 | $645 | $965 |
| Oregon | $425 | $645 | $965 |
| Illinois | $415 | $625 | $940 |
Other HVAC jobs in New Hampshire
- Condenser fan motor replacement: $520 typical
- Run capacitor replacement: $230 typical
- 3-ton system replacement: $9,610 typical
- HVAC diagnostic / service call: $160 typical
- AC or furnace tune-up: $150 typical
- Condensate drain line clear or repair: $210 typical
- Gas furnace replacement, 80k BTU: $5,830 typical
- Reconnect or seal disconnected duct: $325 typical
- Dryer vent cleaning: $160 typical
- Dryer vent reroute or replacement: $515 typical
- AC contactor replacement: $245 typical
- Furnace igniter or flame sensor: $265 typical
- Thermostat replacement: $330 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the furnace blower motor replacement prices in every state, read the HVAC guide, see every job priced for New Hampshire, or see how these prices are calculated.