Furnace igniter or flame sensor cost in Delaware
Modeled · v0.1 · method published · independent of contractors
In Delaware, a fair price for furnace igniter or flame sensor is $150–$380 (per repair), with a typical price of $250. That's 2% above the national typical of $245, reflecting Delaware's regional cost index of 1.02.
Delaware ranks #19 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| Delaware | $150 | $250 | $380 |
| National | $145 | $245 | $370 |
| Pennsylvania | $150 | $250 | $385 |
| Maine | $150 | $245 | $375 |
| Virginia | $150 | $245 | $375 |
| Nevada | $155 | $255 | $385 |
Other HVAC jobs in Delaware
- Condenser fan motor replacement: $490 typical
- Run capacitor replacement: $220 typical
- 3-ton system replacement: $9,080 typical
- HVAC diagnostic / service call: $155 typical
- AC or furnace tune-up: $145 typical
- Condensate drain line clear or repair: $200 typical
- Gas furnace replacement, 80k BTU: $5,510 typical
- Reconnect or seal disconnected duct: $305 typical
- Dryer vent cleaning: $155 typical
- Dryer vent reroute or replacement: $485 typical
- AC contactor replacement: $230 typical
- Thermostat replacement: $310 typical
- Furnace blower motor replacement: $600 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the furnace igniter or flame sensor prices in every state, read the HVAC guide, see every job priced for Delaware, or see how these prices are calculated.