Furnace igniter or flame sensor cost in New York
Modeled · v0.1 · method published · independent of contractors
In New York, a fair price for furnace igniter or flame sensor is $180–$460 (per repair), with a typical price of $305. That's 24% above the national typical of $245, reflecting New York's regional cost index of 1.24.
New York ranks #5 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| New York | $180 | $305 | $460 |
| National | $145 | $245 | $370 |
| Alaska | $180 | $305 | $460 |
| District of Columbia | $185 | $310 | $470 |
| Massachusetts | $180 | $300 | $455 |
| California | $185 | $310 | $470 |
Other HVAC jobs in New York
- Condenser fan motor replacement: $600 typical
- Run capacitor replacement: $265 typical
- 3-ton system replacement: $11,050 typical
- HVAC diagnostic / service call: $185 typical
- AC or furnace tune-up: $175 typical
- Condensate drain line clear or repair: $240 typical
- Gas furnace replacement, 80k BTU: $6,700 typical
- Reconnect or seal disconnected duct: $370 typical
- Dryer vent cleaning: $185 typical
- Dryer vent reroute or replacement: $590 typical
- AC contactor replacement: $280 typical
- Thermostat replacement: $380 typical
- Furnace blower motor replacement: $730 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the furnace igniter or flame sensor prices in every state, read the HVAC guide, see every job priced for New York, or see how these prices are calculated.