Sill plate repair or replacement cost in New Mexico
Modeled · v0.1 · method published · independent of contractors
In New Mexico, a fair price for sill plate repair or replacement is $1,100–$4,140 (per 10 ft section), with a typical price of $2,210. That's 8% below the national typical of $2,400, reflecting New Mexico's regional cost index of 0.92.
New Mexico ranks #37 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| New Mexico | $1,100 | $2,210 | $4,140 |
| National | $1,200 | $2,400 | $4,500 |
| South Carolina | $1,100 | $2,210 | $4,140 |
| Indiana | $1,120 | $2,230 | $4,190 |
| Missouri | $1,090 | $2,180 | $4,100 |
| Nebraska | $1,090 | $2,180 | $4,100 |
Other general contracting jobs in New Mexico
- Full bathroom remodel: $14,000 typical
- 300 sq ft deck build: $8,650 typical
- Structural engineer evaluation: $505 typical
- Subfloor repair, bath or toilet area: $600 typical
- Secure loose railing or post: $240 typical
- Porch or deck railing replacement: $965 typical
- Install stair handrail: $320 typical
- Exterior wood rot repair (trim, fascia): $505 typical
- Interior door adjust or repair: $185 typical
- Fogged window glass unit replacement: $415 typical
- Crawlspace vapor barrier install: $2,760 typical
- Tub or shower caulk and grout repair: $255 typical
- Exterior door weatherstripping: $165 typical
- Small drywall patch and paint: $295 typical
- Garage door opener safety reverse adjustment: $190 typical
- Blown-in attic insulation, 1,000 sq ft to R-38: $1,350 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the sill plate repair or replacement prices in every state, read the general contracting guide, see every job priced for New Mexico, or see how these prices are calculated.