Structural engineer evaluation cost in New Hampshire
Modeled · v0.1 · method published · independent of contractors
In New Hampshire, a fair price for structural engineer evaluation is $380–$920 (per visit), with a typical price of $595. That's 8% above the national typical of $550, reflecting New Hampshire's regional cost index of 1.08.
New Hampshire ranks #14 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| New Hampshire | $380 | $595 | $920 |
| National | $350 | $550 | $850 |
| Colorado | $380 | $595 | $920 |
| Maryland | $380 | $600 | $925 |
| Oregon | $380 | $600 | $925 |
| Illinois | $370 | $585 | $900 |
Other general contracting jobs in New Hampshire
- Full bathroom remodel: $16,400 typical
- 300 sq ft deck build: $10,150 typical
- Sill plate repair or replacement: $2,590 typical
- Subfloor repair, bath or toilet area: $700 typical
- Secure loose railing or post: $280 typical
- Porch or deck railing replacement: $1,130 typical
- Install stair handrail: $380 typical
- Exterior wood rot repair (trim, fascia): $595 typical
- Interior door adjust or repair: $215 typical
- Fogged window glass unit replacement: $485 typical
- Crawlspace vapor barrier install: $3,240 typical
- Tub or shower caulk and grout repair: $295 typical
- Exterior door weatherstripping: $195 typical
- Small drywall patch and paint: $350 typical
- Garage door opener safety reverse adjustment: $220 typical
- Blown-in attic insulation, 1,000 sq ft to R-38: $1,580 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the structural engineer evaluation prices in every state, read the general contracting guide, see every job priced for New Hampshire, or see how these prices are calculated.