Structural engineer evaluation cost in New York
Modeled · v0.1 · method published · independent of contractors
In New York, a fair price for structural engineer evaluation is $435–$1,050 (per visit), with a typical price of $680. That's 24% above the national typical of $550, reflecting New York's regional cost index of 1.24.
New York ranks #5 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| New York | $435 | $680 | $1,050 |
| National | $350 | $550 | $850 |
| Alaska | $435 | $680 | $1,050 |
| District of Columbia | $440 | $695 | $1,070 |
| Massachusetts | $425 | $670 | $1,040 |
| California | $445 | $700 | $1,080 |
Other general contracting jobs in New York
- Full bathroom remodel: $18,850 typical
- 300 sq ft deck build: $11,650 typical
- Sill plate repair or replacement: $2,980 typical
- Subfloor repair, bath or toilet area: $805 typical
- Secure loose railing or post: $320 typical
- Porch or deck railing replacement: $1,300 typical
- Install stair handrail: $435 typical
- Exterior wood rot repair (trim, fascia): $680 typical
- Interior door adjust or repair: $250 typical
- Fogged window glass unit replacement: $560 typical
- Crawlspace vapor barrier install: $3,720 typical
- Tub or shower caulk and grout repair: $340 typical
- Exterior door weatherstripping: $225 typical
- Small drywall patch and paint: $400 typical
- Garage door opener safety reverse adjustment: $255 typical
- Blown-in attic insulation, 1,000 sq ft to R-38: $1,820 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the structural engineer evaluation prices in every state, read the general contracting guide, see every job priced for New York, or see how these prices are calculated.