Furnace igniter or flame sensor cost in West Virginia
Modeled · v0.1 · method published · independent of contractors
In West Virginia, a fair price for furnace igniter or flame sensor is $130–$325 (per repair), with a typical price of $215. That's 12% below the national typical of $245, reflecting West Virginia's regional cost index of 0.88.
West Virginia ranks #49 of 51 for this job, where #1 is the most expensive.
Compared with similar-cost states
| Where | Low | Typical | High |
|---|---|---|---|
| West Virginia | $130 | $215 | $325 |
| National | $145 | $245 | $370 |
| Alabama | $130 | $215 | $325 |
| Kansas | $130 | $220 | $330 |
| Kentucky | $130 | $220 | $330 |
| South Dakota | $130 | $220 | $330 |
Other HVAC jobs in West Virginia
- Condenser fan motor replacement: $425 typical
- Run capacitor replacement: $190 typical
- 3-ton system replacement: $7,830 typical
- HVAC diagnostic / service call: $130 typical
- AC or furnace tune-up: $125 typical
- Condensate drain line clear or repair: $170 typical
- Gas furnace replacement, 80k BTU: $4,750 typical
- Reconnect or seal disconnected duct: $265 typical
- Dryer vent cleaning: $130 typical
- Dryer vent reroute or replacement: $420 typical
- AC contactor replacement: $200 typical
- Thermostat replacement: $270 typical
- Furnace blower motor replacement: $520 typical
Got a quote?
Check it against these ranges with the free lookup on the homepage, browse the furnace igniter or flame sensor prices in every state, read the HVAC guide, see every job priced for West Virginia, or see how these prices are calculated.